When we work with an OEM moving a small, detailed component into ongoing production, we know the challenge is not simply finding a machine that can make the part. The manufacturing process also needs to support repeat orders, controlled tooling, inspection, material supply and the production schedule.
That is where high-volume Swiss machining can be useful. Swiss machines use a guide bushing to support bar stock close to the cutting area, which is especially helpful for long, small-diameter parts where controlling movement during machining matters. With multiple axes, live tooling, bar feeding and multiple operations performed within the same cycle, Swiss machining can reduce handling while supporting repeat production.
We have expanded our Swiss machining equipment with the addition of a new Swiss 329 machine. This gives us another resource for production programs involving small, detailed components and recurring demand. For OEM sourcing managers, manufacturing engineers, operations teams and buyers transferring a program, we believe the machine itself is only one part of the conversation. The production process around it matters as well.
What Qualifies as High-Volume Swiss Machining?
There is no universal production quantity that defines high volume.
When we evaluate a production program, we consider annual demand alongside part size, geometry, cycle time, material, tooling, inspection requirements and how frequently orders are released. A program requiring regular production throughout the year may have different needs from a large order delivered in a single lot.
We commonly use Swiss machining for small-diameter parts with features such as threads, cross holes, off-center holes, grooves and other turned or milled details. The guide bushing supports the material near the cutting tool, which can help limit deflection as material is removed.
When we review a production opportunity, we look beyond whether a machine can make the component. We also consider programming, tooling, material preparation, inspection, scheduling and the requirements for repeat orders.
How Does Swiss Machining Support Production Efficiency?
Swiss machining can reduce the number of separate steps needed to produce some components because several operations can take place within the same setup.
Our New Swiss 329
Our new Swiss 329 adds nine-axis machining capability to our production equipment. The Tsugami BW329Z reference for this machine describes a 32 mm bar capacity, sliding headstock with guide bushing, dual spindles, independent gang slides and 30 standard tool positions with up to 38 available.
The machine uses three-path control so work can be performed across the main and sub spindles while other operations are taking place. Its front and rear spindle tooling also allows certain milling and drilling operations to be performed within the machining cycle rather than moving the workpiece to another machine.
For a production program, these capabilities may reduce cycle time and workpiece handling, depending on the component. A part with several turned, drilled, milled or cross-worked features may gain more from the machine’s multi-axis layout than a part requiring only a small number of turning operations.
Automatic Bar Feeding
Our bar-fed production process allows raw material to be supplied to the machine as a production run continues. Instead of loading each finished part individually, the machine works from bar stock and advances material as needed.
For recurring orders, this can reduce manual material handling and support longer production runs. It also gives us a consistent starting point for each machining cycle.
We still need to account for material selection during process planning. The bar stock needs to meet the drawing and material requirements and the machining process needs to account for the way the material behaves during cutting.
Multiple Tools Within One Setup
Our Swiss machines can use multiple tools to work on different features during the same cycle. On our new Swiss 329, the three-path control, dual spindles and independent gang slides provide several ways to distribute machining operations.
This can help reduce the number of times a component needs to be repositioned. Every additional setup creates another opportunity for variation, handling and additional production time. When we can complete several features from the same setup, the overall process may require fewer handoffs.
Supporting the Cutting Area
A guide bushing places support close to the cutting tool. For long, slender components, this can help control the workpiece as the tool engages the material.
This is one reason we consider Swiss machining for components that can be more difficult to hold during conventional turning. The machine configuration allows us to match the process to the geometry of the part rather than treating every turned component the same way.
How Do We Support Consistency?
A high-volume program needs a controlled manufacturing process from the first setup through ongoing production.
We use stable workholding, established tooling, documented inspection plans and in-process checks as part of our approach to maintaining dimensional consistency. We also monitor tool wear because cutting conditions change as tools are used.
Inspection requirements should be based on the part drawing and customer requirements. Depending on the component, we may use dimensional measurement, visual inspection, surface checks or other testing.
We have in-house inspection equipment and quality systems that include ISO 9001:2015 and ISO 13485:2016 certification. Our facility also houses machining and inspection operations under one roof, allowing our production and quality teams to work within the same facility.
We do not approach production with the expectation that variation can be eliminated entirely. Instead, we establish documented methods for measuring parts, identifying variation and responding when a dimension or requirement moves outside the established range.
What Determines Cost Per Part?
The quoted unit price does not tell the entire story.
When we evaluate a production program, costs can include:
- Setup and programming
- Raw material
- Cycle time
- Tooling
- Part complexity
- Secondary operations
- Inspection requirements
- Lot size
- Packaging
- Production scheduling
For example, a lower piece price may not produce the lowest overall program cost if the part requires several outside processes, additional handling or frequent secondary operations. The same applies when packaging, inspection or delivery requirements are not included in the initial comparison.
We encourage OEM buyers to look at the complete route from raw material to finished, packaged parts rather than comparing machining prices alone.
Our in-house capabilities include Swiss turning along with CNC turning, milling, EDM, laser welding, laser marking and other supporting services. Depending on the component, keeping multiple operations within one facility can reduce outside handoffs and simplify production coordination.
How Should OEMs Prepare for a Production Transfer?
When we quote a production transfer, having enough information about the complete program helps us understand what the project requires.
Before requesting a quote, we recommend providing:
- Current drawings and revision levels
- Annual usage
- Expected order frequency
- Material specifications
- Critical dimensions and tolerances
- Historical quality concerns
- Approved secondary processes
- Packaging requirements
- Delivery expectations
Annual usage helps us understand the expected production load. Order frequency also matters because a program with monthly releases can require a different scheduling approach from one with a single annual shipment.
Historical quality information can be useful as well. If a previous supplier experienced recurring issues with a particular dimension, tool, material, finish or secondary process, sharing that information gives us an opportunity to consider it during process planning.
We also recommend discussing packaging before production begins. Small machined components may have specific packaging, labeling, lot identification, cleanliness or protection requirements.
Current drawings and revision information are also important when transferring an existing program. We need to know which requirements apply to the current production version before programming and quoting begin.
When Is Another Process More Appropriate?
Swiss machining is not the right process for every component.
Conventional CNC turning may make more sense for larger rotational parts, while CNC milling may be better suited to components dominated by non-rotational features. Lower-volume work may also favor another process when the setup and programming requirements of Swiss machining do not provide enough production benefit.
When we select a process, we consider the part geometry, annual demand, material, tolerances, feature requirements and secondary operations.
We support both Swiss turning and conventional CNC turning, along with milling and EDM. Our Swiss machining capabilities include 7- to 9-axis equipment, automatic bar feeding, multiple spindles, simultaneous cutting, cross drilling and off-center drilling. We support production programs ranging from prototypes through high-volume production.
This range allows us to consider the manufacturing process alongside the component rather than starting with one machine type and forcing the part into that process.
Planning a High-Volume Swiss Machining Program?
Successful production depends on more than machine capacity. Material, tooling, programming, inspection, scheduling, packaging and delivery requirements all need to work together.
Our Swiss machining capabilities support production programs from prototypes through high-volume work, with bar-fed equipment, multi-axis machining, in-house programming, inspection and related manufacturing services. The addition of our new Swiss 329 gives us another production resource as we develop new components or take on transferred programs.
If you are planning a new production program or moving an existing component from another supplier, provide us with the component drawing, annual demand, material requirements, quality information and delivery expectations.
Contact Twin City EDM to discuss your high-volume Swiss machining requirements and determine whether the process fits your component and production program.